drain tap & baffle plates

Drain taps and baffle plates are fitted to our tipping skips where the customer has a need to remove any fluids from the unit prior to discharging the waste.

 

The baffle plate will normally be fixed in the bottom of the tipping skip body. A number of holes will be drilled or perforated into the baffle plate to allow any fluid to drain away from the waste prior to disposal. Our standard drain tap is 12.50mm (1/2") diameter bore.


Typically fitted to our smaller units where they are used for collecting swarf or cuttings from engineering processes a drain tap & baffle plate can be fitted. This prevents any coolant / lubricant from being contaminated or entering the waste stream.

 

 

 

For any assistance please call our sales line 01384 483030 where our experienced staff will be able to assess your individual requirements and advise you of the best solution.

 

Recover machine coolants / Remove fluids from waste

Uncontaminated waste 

Extra revenue from scrap

 
draintap1.jpgdraintap3.jpgdraintap2.jpg

Call now on 01384 483030 and ask for our sales team

Ridgeway Manufacturing Limited
Bays 1 & 2B  •  Cookley Wharf  •  Leys Road
Brockmoor  •  Brierley Hill
West Midlands  •  DY5 3UP

Tel  01384 483030  •  Fax  01384 483005
E-mail  sales@ridgewayuk.com

fb.pngtwitter.pngindesign.pngyoo2be.pnggoogleplus.png

© RIDGEWAY MANUFACTURING LIMITED 2018 - TIPPING SKIPS - TIPPING BINS - FORKILFT ATTACHMENTS